|
|
 |
|
|
 |
|
Fremarc Designs furniture will provide years
of beautiful use if treated with reasonable
care. For distressed furniture, maintain the
fine finish by simply dusting with a soft
cloth slightly moistened with water and dry
completely with another clean cloth. Always
rubbing with the grain. For non-distressed
finishes, polish the furniture with a carnuba-based
paste wax every two to four months. Apply
the paste wax in a thin even coat using a
dry cloth, rubbing with the grain of the wood.
Buff with a dry cloth while paste wax is still
moist for a rich lustrous finish.
Tables with parquet tops are made with hand-inlaid
pieces of solid wood. All natural solid wood
expands and contracts as the moisture in its
surrounding atmosphere changes. This is a
natural phenomenon. We do not recommend parquet
tops in extremely dry areas due to lack of
moisture that may cause the parquet to shrink
to the point of opening the joints between
the pieces.
Fremarc Designs finishes are resistant to
minor everyday hazards, but carelessness with
cigarettes, hot dishes, nail polish, alcohol
and moisture will harm the beauty. Use pads
beneath accessories and when writing or eating.
Remove spills and smudges immediately. Avoid
placing furniture near heat outlets, windows
or in direct sunlight. These precautions and
simple care procedures will keep your Fremarc
Designs furniture looking its best…
year after year.
*Please
note all solid lumber table tops may be subject
to slight warpage. Center fills and end fills
must be properly stored laying flat in a controlled
environment to prevent warping. We do not
recommend storing on concrete surfaces.
|
|
|
